impact strength的例句大全

The impact of PNF stretch time on the joint ROM and the muscle strength was studied.

考察不同时间的PNF牵拉对关节ROM和肌肉力量的影响作用。

The content of PBB-PA/ Sb2O3 had little effect on the tensile strength of ABS compared with PBB/ Sb2O3. The addition of PBB-PA improved the impact property.

与PBB/Sb2O3相比，PBB-PA/Sb2O3的用量对ABS的拉伸强度影响较小，并且PBB-PA的加入能够改善ABS的冲击性能。

The results showed the use of MNR could improve the compatibility of PF with PVC matrix, and the impact strength of the composite was increased obviously.

研究结果表明，MNR可以较好地改善PF与PVC基体的相容性，显著提高材料的冲击强度。

Tightsen structural adhesives have excellent tensile, shear and peel strength maximum impact stress and vibration resistance.

泰盛结构胶具有较强的拉伸 、 剪切与剥离强度,耐冲击、耐压、抗振动.

Abrasive ratio, thermal stability, impact toughness and cohesive strength are main performance figures of PDC.

磨耗比 、 热稳定性 、 抗冲击韧性和结合强度是金刚石复合体的主要性能指标.

Low viscosity, high strength, resistant to impact, vibration and solvent.

低粘度, 高强度, 耐冲击 、 耐振动、耐溶剂性优良.

There was no direct relation between residual compressive strength and impact damage area.

层合板的剩余压缩强度与板的冲击损伤面积无直接关系.

Combining with the practice of engineering, analysis is carried out by applying reliability analysis theory to the distribution of stress and strength on the connection rod in the circuit breaker's operating mechanism when at the time of impact load as well as reliability calculation.

联系工程实际，运用可靠性分析理论对断路器操作机构中的连杆受冲击载荷时的应力和强度的分布情况进行了分析，并进行了可靠度计算。

At the same time, the braking material based on benzoxazine from bisphenol and phenolic resin in the presence of hexamine and Lewis acid have been prepared, and the frictional coefficient, tear and wear propert, impact strength and hardness of this material have been determined.

同时制备了以六次、线酚、中间体为主要树脂基体的制动材料，并测定了制动材料的摩擦磨损性能、冲击强度和硬度。

The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.

切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。

Analyzing the impact on the factor of the pea protein Mozzarella cheese curd strength.

影响豌豆蛋白Mozzarella干酪的凝乳强度因素分析。

The influence of thermal oxygen on the tensile yield stress, tensile breaking stress, impact strength, elongation at break, melt point and the heat of melting of PF Nylon 1212 is investigated.

通过热氧老化试验，考察了热氧对尼龙1212拉伸屈服应力、拉伸断裂应力、冲击强度、断裂伸长率、熔点、熔融热的影响。

The vehicle body is used as the carrier in many car assembly parts, so it plays an influential role in the whole bus system, the strength and stiffness of which have a direct impact on the life and safety.

汽车上许多重要总成部件都是以车身为载体，其强度和刚度的好坏直接影响到客车的使用寿命及安全性。

The body frame is an important carrier of the car assembly parts, its just the merits of the strength of the service life of the vehicle and safety have a critical impact.

车身骨架是汽车总成部件的重要载体，其刚强度的优劣对车辆的使用寿命及安全性有着至关重要的影响。

Impact strength 50 kg · cm;

冲击强度50kg·cm；

The results showed that the compatibility between nylon 6 and ethylene-propylene diene monomer rubber ( EPDM) could be improved by adding grafted EPDM. Compared to pure nylon 6, the water-absorption rate of the alloys evidently decreased and their impact strength was higher with less rigidity loss.

结果表明：接枝三元乙丙橡胶明显改善尼龙6与三元乙丙橡胶之间的相容性，合金的吸水率明显降低，在保持较高强度的同时冲击性能远远优于尼龙6，接近或超过韧性尼龙；

Different distribution methods in root has different impact on the shear strength of composite material.

根系不同的分布方式对根土复合体的抗剪强度有不同影响.

Handel is made from high strength industry environmental protective plastic, which is more impact resistant.

手柄采用高强度工业环保塑胶, 更耐重击.

In this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.

本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响.

Experimental results indicated that the impact and tensile strength of this vulcanized blends all higher blends.

研究结果表明,采用动态硫化法可提高共混物的冲击强度和拉伸强度.